Thinner / Cleaner Jotun Thinner Guiding data airless spray Jotun Paints high temperature silicone paint nozzle pressure of 15 MPa (kp/cm2 150 of 2100 psi) nozzle diameter 0.38-0.48 mm (0.015-0.021 ") Spray angle 40-60 ° Filter Check to ensure that filters are clean and dry time Jotun Paints temperature silicone paint ventilation, temperature, film thickness and number of coats, and other factors will affect the drying time, as shown in the following table Typical data are based on the following conditions: * Good ventilation (Outdoor exposure or free circulation of air) * Typical film thickness Jotun Paints temperature silicone paint * One coat on top of inert substrate Substrate temperature 5 ° C 10 ° C 23 ° C 40 ° C Surface dry 60 minutes 45 minutes 30 minutes 15 minutes hard dry 4 hours 3 hours 2 hours 1,5 hours to recoat, minimum 8 hours 5 hours 4 hours 3 hours to recoat, maximum 11. painted on the application of the subsequent layer, the surface must be dry and did not have any contaminants. Jotun Paints temperature silicone paint the data for guidance only, actual drying time / times before overcoating time intervals may be shorter or longer, depending on film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength, and so on. complete package, see the appropriate supporting tables, the supporting table includes all parameters and special conditions. Typical paint inorganic silicate zinc-rich primer OJR (Resist 78) inorganic zinc silicate primer (Resist 86) or inorganic zinc silicate primer (Resist GTI) 1 x 75 microns (dry film thickness) high temperature silicone paint (Solvalitt) 1 - 2 x 20 microns (dry film thickness) or high temperature silicone paint (Solvalitt) 2 - 3 x 20 microns (dry film thickness) Jotun Paints temperature silicone paint a case-by-case basis Other systems must be stored in accordance with national regulations, storage temperature must be below 25 ° C storage conditions should be dry, cool, well-ventilated and away from heat and sources of ignition. Containers must be kept tightly closed. the handling Jotun Paints http://www.fcchem.cn/ temperature silicone paint shelf life: 23 ° C 24 months storage, the higher the temperature, the shorter its shelf life and will lead paint in the tank gelling. Handle with care. Stir well before use. the packaging specifications SOLVALITT (manual) page 33 liters Jotun Paints organic silicon high temperature paint according to local requirements in different countries may have different packaging specifications health and safety, please pay attention to the warning label on the container in a well-ventilated conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin should immediately with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately. detailed information on health and safety precautions and use of this product, we refer to the "Material Safety Data Sheet." Statement of Jotun Paints temperature silicone paint this data sheet is provided entirely based on the understanding that we obtained in the laboratory and practice, but due to the use of the product are usually out of our control In addition, we only give a guarantee of the quality of the product itself. We reserve the right to change the given data without notice. reproduced noted: Jotun Paints | the SIGMA Paint | Haihong paint | paint - Ningbo Jiangdong coated chemical Zuo the temperature paint http://www.fcchem.cn/691.html of Dun paint silicone